海川化工论坛

标题: 经济性分析时反应器出现厚度超过范围应该如何解决 [打印本页]

作者: 单曲猫咪 时间: 2024-9-3 15:18
标题: 经济性分析时反应器出现厚度超过范围应该如何解决
显示的错误是：ERROR> 'VT - 13' THICKNESS OF 341.73 IS OUTSIDE RANGE OF SYSTEM DATA
查了软件说明书，显示的解决方案是：
Problem 8

With a packed tower or plug flow reactor (which is by default mapped to a packed single-diameter tower), this error occurs:

ERROR> 'TW - 1' THICKNESS OF 14.50 IS OUTSIDE RANGE OF SYSTEM DATA

Cause 8

The base material thickness of the tower or reactor is larger than the maximum allowed thickness. Usually this occurs when the diameter specified in the simulation is larger than reasonable.

Solution 8

Either adjust the base material thickness manually in the equipment grid, or reduce the tower or reactor diameter in the simulation.

With reactors where the diameter is much larger than the length, you may typically want to decrease the diameter and increase the length to preserve the reactor volume.

但是1改变厚度之后，仍然存在该问题；2减小直径增大长度，就会显示其他错误，比如"ERROR> 'VT - 13' FLANGE RATING IS ZERO AT A TEMPERATURE OF 530.0 AND A PRESSURE OF 209."应该如何解决呢？

作者: mztiozttog 时间: 2024-9-3 17:15
重新核对模拟输入的参数是否合理，包括材料的选择、温度和压力设定。

.

作者: 单曲猫咪 时间: 2024-9-4 09:29

mztiozttog 发表于 2024-9-3 17:15
重新核对模拟输入的参数是否合理，包括材料的选择、温度和压力设定。

.

好的，感谢

欢迎光临海川化工论坛 (https://bbs.hcbbs.com/)